How to Properly Clean Your Electric Scooter

How do I clear an electrical scooter? Effectively, it’s like cleansing a motorcycle however with just a few further steps and way more care. You will want to watch out not to make the circuits moist. Don’t fear, you’ll find all of the solutions you want on this article.

The cleansing requires solely the next issues to boot:

  • Mushy sponge
  • Clean water and soapy water (each individually, lukewarm water is one of the best)
  • WD40, oil, Vaseline or Vaseline spray for lubrication
  • A cleansing brush or a easy brush (low cost toothbrushes for the hard-to-get areas are each nice and inexpensive)
  • Just a few disposable rags
  • 2 buckets (1 for soapy water and the opposite for the clear water)
  • And endurance (not as a result of it should take a very long time, however since you don’t need to hurt the electronics)

Observe these steps to clear your electrical scooter:

  1. Get all the mandatory cleansing gear prepared
  2. Clean the exterior elements utilizing two buckets (one with soapy water and one with clear water): handlebars, footrest, throttle and brake levers, suspension, lights, fenders, and the kickstand
  3. Wash the wheels – use a separate sponge if potential, as wheels are the dirties elements
  4. Lubricate the shifting joints

Would you want to know extra?

Then be part of us within the article under, as we provide an in-depth description on how to correctly wash your electrical scooter.

Cleansing the scooter

I like to recommend that earlier than washing, you need to give it a run or two, particularly in the event you rode it within the rain not too long ago. This serves two features: to warmth it up and to get out any water that might be inside. That is due to the truth that soiled water could be blocked beneath the fenders or different locations. Additionally, protecting the soiled water there can mess the e-scooter with extended publicity. However this step is totally arbitrary.

The circuits are manufactured with sturdiness and safety in thoughts, so they’re higher protected than we predict. Some select to comply with the aspect of warning, some don’t care. And each are fortunately using into the sundown.

The steps of cleansing your scooter

Simply as a heads up, the method in it of itself is on no account difficult. When you’ve got ever cleaned a motorcycle, the method is mainly the identical, however with extra care concerned. That is due to the vulnerability of the inner circuits to the results of water.

Step 1

First, you need to correctly set-up your washing process.

After you’ve gotten ready all of the instruments vital for cleansing, make certain that all the pieces is in place. The scooter must be totally stopped, so that you could be keep away from any pointless accidents.

You also needs to strive to do it out of doors until it’s raining. Not solely is it extra nice, however the fixed circulation and call with the skin air hold the digital elements dry.

In case you are in a rush, you may superficially puff it with some water/Ajax for a pleasant and fast outer facet. Use one thing water resistant to defend the ground from the dripping water and you might be good to go. This mild clear works very effectively when the electrical scooter is simply stuffed with mud however no mud.

Nevertheless, an intensive clear is extremely beneficial.

Step 2

Clean up the primary exterior elements.

Get the bucket of soapy water, the sponge or the rag. Dip the sponge within the soapy water after which totally squeeze as a lot moisture as you may off it. The truth is, squeeze it till it’s virtually utterly dry. That is completely different from washing a automobile, the place you’ll need a number of water so it might probably lubricate the floor. However a number of water isn’t good for the electronics inside the electrical scooter.

You’ll be able to although get extra water to the areas the place you don’t have any electronics. Ensure you know the place is the battery positioned (handlebar or beneath the deck plate)

Begin by cleansing the handlebars, footrest, throttle levers, forks, lights, fenders, and the kickstand. Keep away from the wheels for now, as they’re a extra delicate topic.

Then, get the bowl of clear water and repeat the method to rinse the cleaning soap off.

Skilled tip 1

if you’d like to be a PRO, there may be a sophisticated approach: get the sponge into the soapy water, wash the scooter after which clear the sponge within the clear water bucket. It will stop any dust from sticking to the sponge and scratching the scooter’s paint. Repeat this a number of occasions protecting solely slightly floor. This minimizes the change of mud/small rock or every other materials sticking into the sponge. Additionally, one of the best sponge you should use is a microfiber one. You’ll be able to simply get one on Amazon. Get a separate bucket for rinsing.

Skilled tip 2

At all times wash it getting in straight traces, the round movement may cause the spider scratch. In case your scooter may be very soiled, the probabilities of scratching it rise.

After this, you need to wipe all of the water off with a dry rug. You will need to keep away from the chance of getting any droplets of water slide into the electronics. A second and fast dry would at all times be welcome, however at this level, I’m in all probability providing you with an excessive amount of work to do.

Don’t use a hairdryer as it might probably ship the other impact: inserting the water into the digital circuits through tiny channels. Additionally, it heats up the circuits so it’s not beneficial.

Step 3

Getting the wheels washed.

Take a sponge or a disposable rag, dip it into the soapy water and totally wash the wheels. These are tires in spite of everything and easy water does wonders with rubber. Additionally, make certain to scrub the inside of the again wheel with simply as a lot thoroughness. Use the comb to go between the wheel spokes. Ensure you use a light-weight brush so that you don’t scratch the paint.

Easy cleansing options, resembling Ajax Multi-Motion additionally work very effectively. It’s in the end a matter of private choice. Strive solely to keep away from heavy cleansing chemical substances, which may in the end harm your tires over time.

Additionally, if you are at it, take your time with inspecting the wheels for potential tears and different such potential issues. When you’ve got air tires, possibly you may examine the tire strain as effectively.

Step 4

Grease the cellular joints and suspension if wanted.

After totally washing and drying the wheels, you also needs to care for the brake pad. It’s simply as vital as every other part. For it, use the identical course of as with the wheel washing.

It is not uncommon information for any bike or automobile consumer that if the brake pad is stored dry, extended utilization will ultimately harm the complete braking system. So, after the cleansing, it’s time for the lubrication. However, learn your consumer guide at this step, your brakes could not want lubrication.

Simply as with bikes, use any of the next: WD-40, oil, Vaseline or Vaseline Spray on the pad. Use them in small to average quantities after which flip the wheel for equal distribution. An excessive amount of can truly be dangerous and can render the brake pad non-responsive due to an excessive amount of slippery motion.

And if you are at it, use so lubrication on the shifting joints as effectively. Extra particularly, those close to the suspension and the fast launch clamp for altering the deal with peak. You can even lubricate the pins that join each wheels to the scooter however watch out to not overdo it. The handlebar stem may want lubrication.

Why clear it?

Propper upkeep and common cleansing will, like with something, lengthen its lifespan by a protracted shot.

And you will have it to stay a protracted and completely happy life, seeing as what number of fashions get into the 400$-500$+ vary. If something, don’t see washing it as a chore, however as a hobby-like exercise.

How usually do you have to wash it?

On common, you need to clear your e-scooter as soon as each two weeks. You’ll be able to and may do it greater than as soon as if the climate is wet and soiled outdoors. It isn’t solely that the muddy water makes it look unhealthy, however it slowly damages the scooter over time.

What not to do whereas washing it?

Utilizing a Hose

The very first thing that comes to thoughts when talking of cleansing an digital scooter is a hose and even strain washing it. Though there are folks on the market who hose their scooters, I might not suggest it to you. Water pouring from a hose doesn’t go wherever you need and in no matter portions you need. And water can simply infiltrate the gaps that lead to the electrical circuits.

Even supposing these issues are sturdy, they aren’t invincible. In addition they aren’t low cost to substitute. The scooter, though made to be sturdy, regardless of its small measurement, isn’t invincible to a gradual stream of water. Its sturdiness comes from its potential to perform correctly in wet situations resembling easy rains.

Excessive-pressure wash

And don’t get me began on strain washing. Not all scooters are made equally. So as to emphasize this, take what I stated about hose washing and amplify in by 100. Some scooters are of top of the range, whereas some should not. Some have good and sturdy protecting supplies, whereas some are in all probability purchased from a pawn store.

A high-pressure wash delivers a strain 100 bars or extra which may simply get water into the circuits between the gaps.

The purpose is that no matter producer, flaws can exist within the protecting casings and the standard of the supplies. And by strain washing, you aren’t solely risking the inner circuits, however you might be additionally slowly “skinning them alive”.


When you’ve got performed it correctly, it means that you’ve cleaned it from “head to toe”, together with its brake system. Which is why utilizing it simply after washing and greasing it’s harmful to trip it. Water on the surfaces used for braking can, for a time, scale back and even hinder braking maneuvers. And it’s all advantageous and dandy till you break into the literal entrance of a automobile.

Nevertheless, if you’re that keen to instantly strive it out, discover some flat the place there are not any folks round. There you may take a look at your breaks at your personal leisure, with out endangering anybody.

One other factor to be mindful isn’t to go away it within the solar. Many scooters have exteriors that incorporate plastic or plastic-like supplies. Additionally, most are black. And what do black, water coated plastic-like supplies do within the daylight?

They appeal to warmth from the solar. Which, after a protracted sufficient publicity, can lead to the inner circuits being slowly cooked from the inside-out. For those who do, nevertheless, want to go away it drying outdoors, a easy resolution is to discover some continuously shaded space.


Another excuse why not to let it dry within the solar is the steam. When beneath the solar, the drying water will create vapors that may very simply enter the circuitry.

There are additionally those that say that leaving it to dry naturally is dangerous to the metals, due to rusting. For this, nevertheless, there’s a easy and apparent resolution. First, you wipe it dry with a towel or a rag after which you may go away it within the shade. This could each defend the metals from rust and hold is contemporary.


There are, nevertheless, fashions on the market which might be mainly immune to the blight of rust, such because the Egret One scooter. As a substitute of metal, it’s manufactured from principally aluminum, which is mainly immune to rust. Its bolts, regardless of being manufactured from metal, are coated with zinc, in order that they could not rust.

However aren’t E-scooters waterproof?

It is a widespread false impression relating to e-scooters. They don’t seem to be waterproof by any means. Most producers even advise in opposition to using them within the raid and thru puddles, due to the chance of water-related mishaps.

Effectively, how will you discover out info relating to your scooter’s water resistance capabilities? There are two most important methods: The primary is just wanting on boards or every other web site for info relating to your scooter.

IP Ranking of Electric Scooters

In the end, it revolves across the IPX ranking of the scooter. Understanding what IPX ranking your trip has will enable you decide whether or not you may safely use the scooter in rain. The IPX must be written someplace inside the specs. Both that or you may merely discover it on-line. It’s extremely indicated that your electrical scooter has an IP of at the very least 54 to be usable in light-rainy situations.

This issues loads as a result of it exhibits how weak electrical scooters are to water. The IP system primarily advises in opposition to utilizing them in rain, however how about washing? Effectively, in the event you comply with down under information, by squeezing the sponges/rags you gained’t have any issues.

Cleansing Sprays for Electric Scooters

Cleansing sprays are additionally protected, however you should be cautious not to goal the circuits. Simply to be protected, you may spray a rag and clear it with it.

Submerging the electrical scooter

Submerging them in water, nevertheless, or hosing them is a giant no-no, since their elements should not made to be sealed shut. Water will get in and it’ll fry the electronics. Carry on studying to discover out why hosing or strain washing is a really unhealthy thought.


Similar to something mechanical, a superb wash should be adopted by an intensive inspection. See if there may be any water left close to the weak circuits. Additionally, examine if the freshly lubricated brake pad is so as, then the integrity of the brakes and so forth.

Some could not even trouble to comply with most of those steps correctly. Nevertheless, one factor is for certain, and that’s that your e-scooter’s lifespan could be drastically elevated with a superb wash.

Till subsequent time, trip safely.